繁中   | 简中   | English   |
     
Home About Us Application PP.PO New Product Printing Processing Certification Purchasing Guide Sample Request Contact Us
 

 Printing Processing

 PEPA® Processing instructions

 

Note on PEPA® in the foil stamping process::

 
1. It is suggested that low-temperature stamping film whose machining temperature is about 80-95℃ be used.
2. Flat and bright stamping quality, uniform large-area stamping and continuous small letters can be obtained.

Possibility of Material Application

 
(NPC, Mar 1, 2023)
NAN YA PLASTICS CORPORATION 380 SEC.6 NANJING E. RD. TAIPEI. TAIWAN.
Copyright © 2013 NAN YA PLASTICS CORPORATION All Rights Reserved