Specifications：
PEPA®：PS-80 |
Description：
Traditional release liner has mainly adopted PE-coated film and glassine However, since the roughness on the paper’s surface is rather high, it can easily cause roughness on the adhesive surface. Furthermore, PE-coated film cannot be recycled and has to be disposed of as waste. On the contrary, the roughness of PEPA® surface coating is lower than 1µ, which will keep the adhesive face smooth and bright, thus making it appropriate for use in the backing paper of high-level stickers.
※We recommend this product for pressure sensitive label factories and label designers.
|
Advantage： |
| 1. |
The finished product does not need to control its moisture retention, and it has good smoothness and resilience. |
| 2. |
The coating surface is glossy and smooth. |
| 3. |
The printability of finished label products with collocation can be improved, resulting in a high-quality finished product. |
| 4. |
Singular material, which is recyclable and environmental friendly. |
| 5. |
Penetrating grade, so it can be used in automatic labeling. |
Procedure：
Roll PS grade → processing of release agents of UV or solvent type(low-temperature system) → finished product
|
Possibility of Material Application |
 |
| Characteristic comparison |
PEPA® |
| 1 |
Recommended
choice: |
PS-80 |
| 2 |
Thickness 80μ |
80 |
| 3 |
Smoothness |
◎ |
| 4 |
Thickness uniformity |
◎ |
| 5 |
Stiffness |
◎ |
| 6 |
Resolution ratio of
printing |
◎ |
| 7 |
Dryness time |
○ |
| 8 |
Proportion |
0.83 |
| 9 |
Paper folding and
enfoldment |
○ |
| 10 |
Punching and stamping |
◎ |
| 11 |
Applicable temperature |
-15～120℃ |
| 12 |
Moisture resistance |
◎ |
| 13 |
knurling |
○ |
| 14 |
Weather-resistant
temperature |
-15～50℃ |
| 15 |
Project development |
◎ |
| 16 |
Price comparison |
Medium-low |
| |
Contact us |
| X→No、△→OK、○→Well、◎→Excellent |
